Sink

Post Reply
Stoker1538
Posts: 38
Joined: Fri Sep 01, 2017 7:01 pm
Anti Spam measure: No
AntiSpam Text: Westerly
Location: Plymouth

Sink

Post by Stoker1538 »

Looking for a stainless sink unit that I can fit into the existing sink moulding of my centaur
Don’t mind if I have to cut the old one out and trim the hole a bit but currently struggling to find a sink within the tolerances of the moulding. I’ve seen pictures of centaurs that have had this done so there must be a sink unit out there somewhere. Can anyone help me where to find one?

Also I’ve seen the plate holders can be cut and modified to take drawers, again is this a case of building the drawers yourself or do they sell them somewhere?

Thanks
Alex
Hillary
Posts: 135
Joined: Fri Sep 02, 2016 9:36 am
Anti Spam measure: No
AntiSpam Text: Westerly

Re: Sink

Post by Hillary »

Hi You might try Penguin Engineering on Hayling Island. The staff there were very knowledgable when i was looking for sink taps.

http://www.penguineng.com/sinks.html

Cheers,

Hillary
Moonshine, Centaur CR1149
Stoker1538
Posts: 38
Joined: Fri Sep 01, 2017 7:01 pm
Anti Spam measure: No
AntiSpam Text: Westerly
Location: Plymouth

Re: Sink

Post by Stoker1538 »

Thanks, I have sent them an email
Post Reply