Warwick Master Switch Replacement

Post Reply
Trevorqt
Posts:3
Joined:Mon Feb 14, 2011 9:35 pm
Anti Spam measure:Yes
AntiSpam Text:easyeasy
Warwick Master Switch Replacement

Post by Trevorqt » Tue Jul 02, 2013 9:21 am

This season the Master switch on my Warwick has started to play up, by putting pressure on the face of the switch the circuit is completed and I can start the engine (Yanmar gem10) and run any electrical bits. I am therefore thinking the way to deal with this is to replace the switch. I was wondering if some one could tell me how I go about finding the correct spec for the new switch. I have two Batteries on board and the current switch gives the option for one on, two on or both on.

Uncle Albert
Posts:132
Joined:Wed Apr 09, 2008 9:45 pm
Anti Spam measure:No
AntiSpam Text:Westerly
Location:Me Essex Nr Maldon. Boat Blackwater Nr Maldon

Re: Warwick Master Switch Replacement

Post by Uncle Albert » Tue Jul 02, 2013 2:51 pm

Before spending big bucks at a Chandlery look at

http://www.durite.co.uk/pdf/2013/3/03.1 ... lators.pdf

An Auto Electric spares should be able to order you one.
Uncle Albert
CR1702

Trevorqt
Posts:3
Joined:Mon Feb 14, 2011 9:35 pm
Anti Spam measure:Yes
AntiSpam Text:easyeasy

Re: Warwick Master Switch Replacement

Post by Trevorqt » Fri Jul 05, 2013 4:11 pm

Thank you very much I think I have found what I am looking for.

Membership of this organisation is worth every penny.

Kind regards

Trevor

Post Reply