Anchor for Konsort

Post Reply
RogerLloyd
Posts: 33
Joined: Fri Jun 08, 2007 2:03 pm

Anchor for Konsort

Post by RogerLloyd »

If you have a Konsort and 15kg Rocna, or similar weight Mantus, I would be delighted to know how it fits the bow roller.
Thanks.
Roger@RNL
Vegable
Posts: 305
Joined: Sat Apr 28, 2007 3:27 pm
Anti Spam measure: No
AntiSpam Text: Westerly
Location: Abersoch; N.Wales, Boat back in Arisaig.

Re: Anchor for Konsort

Post by Vegable »

I think you'll find that none of the "new generation" type anchors fit the old bow rollers comfortably without a lot of modification. What I suggest is to wander around a biggish marina and see what other people have done, which is what I did - I have a Spade. Photograph the designs/bodge ups you like, then make up a cardboard template for your boat of your fitting and the anchor shank, check that it works freely and how you want it to and then find a stainless steel fabricator to make something up for you. Preferably a fabricator a long way from the sea! If you google something like anchor holders/bow roller extenders etc., etc., you'll find off the shelf items are in the region of £2-300 !!!
Mike
"There is nothing worse than running ashore, unless you are uncertain as to which continent that shore belongs"
RogerLloyd
Posts: 33
Joined: Fri Jun 08, 2007 2:03 pm

Re: Anchor for Konsort

Post by RogerLloyd »

Many thanks for your suggestions.
Roger
Roger@RNL
Post Reply