Blakes seacock Centaur

Post Reply
twinbilge
Posts:8
Joined:Tue Jan 06, 2015 4:55 pm
Anti Spam measure:No
AntiSpam Text:westerly
Blakes seacock Centaur

Post by twinbilge » Mon Feb 09, 2015 2:42 pm

Hi,

Can anyone tell me how to remove the handle from this valve. Seems it needs to be prised off and can't believe it's been cast in one piece!

Tony

Jolly Roger
Posts:1005
Joined:Mon Sep 02, 2013 1:08 pm
Anti Spam measure:No
AntiSpam Text:Westerly
Location:Kent, UK

Re: Blakes seacock Centaur

Post by Jolly Roger » Mon Feb 09, 2015 2:59 pm

Tony

This is an exploded view of a Blakes seacock and should help.
http://www.sparesmarine.co.uk/webshop/s ... ter=Blakes
Roger
Concerto Fulmar FR38
Photos at http://s1294.photobucket.com/user/Conce ... 2/library/

User avatar
rhumlady
Posts:678
Joined:Tue Feb 21, 2006 9:26 pm
Anti Spam measure:No
AntiSpam Text:westerly
Location:Clyde area

Re: Blakes seacock Centaur

Post by rhumlady » Mon Feb 09, 2015 8:39 pm

Some of them were me piece. Both mine are anyway.
Derek
Konsort 'Rhumlady' KT213

twinbilge
Posts:8
Joined:Tue Jan 06, 2015 4:55 pm
Anti Spam measure:No
AntiSpam Text:westerly

Re: Blakes seacock Centaur

Post by twinbilge » Tue Feb 10, 2015 7:54 pm

Mine are early type without grease nipple and are definitely two pieces. Handle could be a press fit. Reluctant to apply brute force.

Seems I am managing to lap them without 360 degree rotation. Test will be the launch :roll:

Post Reply