Replacement IYE mainsheet traveller wheels for 'C' section

Post Reply
Konsortium
Posts: 74
Joined: Sun Feb 09, 2014 11:48 pm
Anti Spam measure: No
AntiSpam Text: Juliette
Location: Kent

Replacement IYE mainsheet traveller wheels for 'C' section

Post by Konsortium » Wed May 21, 2014 6:41 pm

Hi, I'm looking to refurbish my IYE traveller that sits on a 'C' section rail. the wheels are about 28mm in diameter but i am not sure how much they have worn, as the car is very, very loose in the rail.

Can anyone one advise where i can buy such wheels cost effectively or where i can get such things made and what the original wheel size would have been?

Also, one of the rope pulleys is also damaged, so ideally, i'd like to replace these too.

Thanks again for your help!

smudger
Posts: 129
Joined: Fri Mar 15, 2013 10:59 am
Anti Spam measure: No
AntiSpam Text: antispam

Re: Replacement IYE mainsheet traveller wheels for 'C' secti

Post by smudger » Wed May 21, 2014 7:21 pm

Hi,google iye mainsheet traveller,top of the list is southern rigging supplies,under C Series Acc. & Spares you will find IT-C401 Replacement wheel bearings,hope this helps! :wink:

splitpin
Posts: 22
Joined: Tue May 18, 2010 9:47 pm
Anti Spam measure: No
AntiSpam Text: Westerly

Re: Replacement IYE mainsheet traveller wheels for 'C' secti

Post by splitpin » Wed May 21, 2014 7:27 pm

I replaced the IYE traveller wheels on my Tempest some years ago with a kit from Barton part no PLB 64906.
I seem to remember the wheels were 28X12x6
Worth contacting them

Bertgear
Posts: 95
Joined: Sat Nov 09, 2013 4:08 pm
Anti Spam measure: No
AntiSpam Text: Westerly
Location: Sunny North Devon

Re: Replacement IYE mainsheet traveller wheels for 'C' secti

Post by Bertgear » Fri May 23, 2014 9:53 am

I have some if you private message (PM) me
Bert Gear
Fulmar FR 281 'Rubicon'
ilfracombe

Christian Brewer
Posts: 17
Joined: Tue Dec 20, 2011 10:05 am
Anti Spam measure: No
AntiSpam Text: Westerly

Re: Replacement IYE mainsheet traveller wheels for 'C' secti

Post by Christian Brewer » Fri May 23, 2014 3:41 pm

Proboat in Burnham on Crouch can supply you with a new traveller

Christian

Uncle Albert
Posts: 132
Joined: Wed Apr 09, 2008 9:45 pm
Anti Spam measure: No
AntiSpam Text: Westerly
Location: Me Essex Nr Maldon. Boat Blackwater Nr Maldon

Re: Replacement IYE mainsheet traveller wheels for 'C' secti

Post by Uncle Albert » Mon May 26, 2014 9:54 pm

+1 for proboat I obtained some replacement wheels a couple of years ago. Good guys.
Uncle Albert
CR1702

Post Reply