Raw water strainer for Seahawk

Post Reply
p.whitney@sky.com
Posts: 2
Joined: Mon May 30, 2016 11:01 am
Anti Spam measure: No
AntiSpam Text: Westerly

Raw water strainer for Seahawk

Post by p.whitney@sky.com » Sat Jun 04, 2016 12:07 pm

My raw water strainer needs replacing as the two pipes, one inlet, one outlet are corroded.
The item is a large black coloured reservoir with a screw top, and inner black seal and a removable strainer. The unit is attached to the inside of the engine compartment with 4 bolts which go through into the rear cabin.
My problem is that I'd like to fit the new unit when I next go down to the boat but I do not know the size of the pipes.
If anyone knows the make of the strainer fitted on the 1988 Seahawk that would obviously be the best option
Thanks

BarryandLinda
Posts: 143
Joined: Sun Oct 05, 2008 1:29 pm

Re: Raw water strainer for Seahawk

Post by BarryandLinda » Sun Jun 05, 2016 4:40 pm

Hello,
This sounds like the standard Volvo strainer on the 2003 series engines. If it is, then go on to the KeyParts website they have all the information you need to select the right parts.
regards
Barry

Post Reply