Search found 29 matches
- Sat Jun 30, 2018 12:59 pm
- Forum: Instruments & electrics
- Topic: New Owner Questions - How To Replace Fuse In Switchboard
- Replies: 6
- Views: 1946
Re: New Owner Questions - How To Replace Fuse In Switchboard
There is no fuse in it it's just a trip switch. Unless it's faulty you should be able to reset it and your fridge will work again, of course it could be a faulty fridge or fridge circuit that keeps tripping the switch. You could have a faulty trip switch and need to change it but that's easy to do. ...
- Tue Jun 26, 2018 7:18 pm
- Forum: Hull, Deck, Rigging & Sails
- Topic: Discus coachroof hand rails
- Replies: 2
- Views: 979
Re: Discus coachroof hand rails
Can't speak for a Discus but the ones on my Corsair are drilled and screwed to the deck head then plugged. If you are replacing with new it shouldn't be to much of a job removing them either by drilling the plugs and unscrewing or cutting them off flush and leaving the screw shaft behind. If intendi...
- Sun Jun 17, 2018 11:39 am
- Forum: Cabin fittings & installations
- Topic: Discus saloon hatch
- Replies: 6
- Views: 1795
Re: Discus saloon hatch
Sorry but I'm in West Wales so not a lot of help to you, you'll have to wait for someone from the SE to log on.
- Sun Jun 17, 2018 11:06 am
- Forum: Cabin fittings & installations
- Topic: Discus saloon hatch
- Replies: 6
- Views: 1795
Re: Discus saloon hatch
Can you tell us which area you are in?
- Mon Jun 04, 2018 4:31 pm
- Forum: Engines & transmission
- Topic: Gear Selector
- Replies: 7
- Views: 2247
Re: Gear Selector
ASAP have them on stock https://www.asap-supplies.com/clutch-sh ... ives-19646
- Fri Jun 01, 2018 12:05 pm
- Forum: Engines & transmission
- Topic: Gear Selector
- Replies: 7
- Views: 2247
Re: Gear Selector
There are exploded parts diagrams on line here :- https://www.marinepartseurope.com/en/e- ... 1C-HY.aspx That will give you a part number and starting point to assist your search.
- Fri Jun 01, 2018 12:00 pm
- Forum: Cabin fittings & installations
- Topic: Tiger fore hatch locking leavers
- Replies: 4
- Views: 1599
Re: Tiger fore hatch locking leavers
A good starting point is Trafalgar Yacht Services in Fareham http://www.westerly-yachts.co.uk/ they are the font of knowledge of all things Westerly.
- Sat May 12, 2018 8:43 pm
- Forum: Technical Information
- Topic: Konsort fin keel
- Replies: 7
- Views: 1536
Re: Konsort fin keel
As a salesman Roger you're top draw, I read that and nearly paid again and I'm already a member.
I do have to agree with every thing you said, it's win win, what's not to like.

- Thu May 10, 2018 8:32 pm
- Forum: Hull, Deck, Rigging & Sails
- Topic: Corsair Anchor Locker Alteration.
- Replies: 11
- Views: 2637
Re: Corsair Anchor Locker Alteration.
As this thread has bobbed up again I thought I'd update it with the (slow) progress so far. I have enlarged the anchor locker by bring the locker bulk head back about 8" at the top and angling it down so the bottom of it is close to where it stepped in the original design. This was as much to a...
- Tue May 08, 2018 12:29 pm
- Forum: Cabin fittings & installations
- Topic: Washing Up Bowl for Konsort Sink
- Replies: 3
- Views: 1032
Re: Washing Up Bowl for Konsort Sink
We have one that fits the sink on a Corsair, what are the dimensions of the Konsort sink?
- Wed May 02, 2018 2:56 pm
- Forum: Technical Information
- Topic: Konsort Duo steering cylinder leaking
- Replies: 3
- Views: 1233
Re: Konsort Duo steering cylinder leaking
Well sea star are still about so worth getting in touch. Not sure if they sell new only or can supply spares .
http://www.seastarsolutions.com/product ... w/seastar/
http://www.seastarsolutions.com/product ... w/seastar/
- Thu Apr 26, 2018 6:01 pm
- Forum: Engines & transmission
- Topic: Penta Horsepower
- Replies: 4
- Views: 1413
Re: Penta Horsepower
There should be an engine ID plate on the engine somewhere, usually on the port side assuming nobody has removed it in an earlier life. If you can find it the site below may help you with more info.
http://www.volvopenta.com/marineleisure ... ecals.html
http://www.volvopenta.com/marineleisure ... ecals.html
- Fri Apr 20, 2018 11:05 am
- Forum: Hull, Deck, Rigging & Sails
- Topic: Corsair deck hatch sizes?
- Replies: 1
- Views: 815
Re: Corsair deck hatch sizes?
OK I'm back aboard so can sort it myself now. For future reference if anyone searches for the same info on a MK1 Corsair they are fore cabin and stern cabin 20" (51cm) square and the saloon 12 3/4" x 18" (32.5cm x 46cm). These mesurements are the opening size of the plastic trim the a...
- Sun Apr 15, 2018 12:39 pm
- Forum: Hull, Deck, Rigging & Sails
- Topic: Corsair deck hatch sizes?
- Replies: 1
- Views: 815
Corsair deck hatch sizes?
I very carefully measured the sizes of the deck hatches on my Corsair yesterday and put the piece of paper safely in the chart table where it remains. The problem is I'm now 100 miles away with saw, wood, and netting to make mozzie screens but no dimentions :oops: can anyone out there help me? It ju...
- Wed Mar 07, 2018 7:57 am
- Forum: Hull, Deck, Rigging & Sails
- Topic: Roller furling won't rotate
- Replies: 12
- Views: 1991
Re: Roller furling won't rotate
It looks like a rotostay to me, there's an image of one here with the name still on it and help on taking it apart. https://www.westerly-owners.co.uk/woaforum/viewtopic.php?f=3&t=3971&p=16599&hilit=rotostay#p16599 And more here. http://www.ybw.com/forums/showthread.php?110907-Changing-be...